Crafts from ribbons and fabric. Crafts from ribbons. The work consists of several stages

Flowers made from satin ribbons look very beautiful. Every person who sees such a decoration will want to repeat it with their own hands. This activity is exciting and addictive. At first, things may not work out, but after a while you can learn everything. Step-by-step instructions for folding flowers from ribbons with your own hands will help you with this.

Making satin flowers

Making flowers from satin ribbons is no more difficult than learning to knit. The main thing is to carefully study the patterns for creating crafts. Then everything will work out. For work you will need the following materials:

1. Ribbons of different widths and colors.
2. Threads of various shades.
3. Scissors.
4. Needles.
5. Sequins.
6. Fishing line.
7. Glue gun.
8. Tweezers.
9. Ruler.
10. Beads.
11. Candle.
12. Table lamp.
13. Chalk or soap.

There are two ways to make flowers from ribbon - melting or the kanzashi technique.

The second manufacturing method came to Russia from Japan. This is how locals decorated their hairpins. Several types of petals were used: sharp, round and long. Hairpins, clothes, hairpins or headbands are decorated with this craft.

Color scheme made from ribbons using the kanzashi method

1. First, prepare the workplace.

2. You will need a table and a lamp with bright light.

3. Take a tape 6 cm wide.

4. It is cut into equal squares.

5. The square is folded diagonally, after which the two corners are lowered to the central fold.

6. Thus, a rhombus is obtained.

7. The side corners are bent back, the cut point is clamped with tweezers.

8. It is straightened with scissors and then pollinated by fire.

9. The result is a round petal.

10. You will need several blanks.

11. The resulting parts are assembled using thread.

12. A bud is obtained, which is glued to the base.

13. The middle is glued on top.

Flowers made from satin ribbons using the kanzashi method are ready!

Fused petal flower

Another common method for making crafts is the reflow method. Typically, the method is used for a large composition, for example, for a basket of flowers. When making crafts using this technique, some nuances are taken into account:

1. Kanzashi petals look more neat than those made using the melting method.
2. This method is labor-intensive, so it may not work the first time.
3. Not all ribbons are suitable.
4. Only ordinary ones, made of brocade, satin or nylon, are used.

First, a blank is drawn on a sheet of paper. The template is cut out. A minimum of 12 petals are made. The template is applied to the tape, outlined with chalk, and then cut out. Each petal is made smaller in size than the previous one. The flame pollinates the edge of each piece.

Finished crafts are assembled into a bud. The work is done carefully so that the flower turns out symmetrical. The base of the craft is pinned with a needle or pin, and a sequin or bead is sewn into the middle. The flower is ready by melting. Such flowers made from satin ribbons fit well into bouquets for gifts.

Chamomile made of satin ribbons

Chamomile has always been a symbol of sincerity and tenderness. This craft can be used to decorate a bag or clothing. Chamomile is made using different methods. To do this you will need ribbons of different widths.

Take a ribbon 1.5 cm wide. To make a flower you will need scissors, a satin yellow ribbon, a fabric base, a ribbon 1.5 cm wide, matches and a glue gun.

1. The tape is cut into 28 rectangles.
2. The length of each is taken to be 4 cm.
3. The top of the segment is cut out so that a semicircle is formed.
4. The resulting workpiece is melted with a flame so that the edges are bent.
5. The lower front corners are wrapped towards the center.
6. The same is done with the remaining segments.
7. The base is prepared, a circle with a diameter of 2.7 cm is cut out of thick fabric.
8. 14 petals are glued onto the prepared base.
9. Several more pieces of blanks are glued under them.
10. The middle of the craft is twisted from yellow ribbon.
11. It is secured with a glue gun to the resulting product.

The beautiful chamomile is ready!

Ribbon flower 5 cm wide

To make the product beautiful and symmetrical, you need to follow the diagram on how to make a daisy from a satin ribbon. There are two ways to form a flower. First option:

1. For the DIY ribbon daisy master class, you will need the following tools: matches, satin ribbon, tweezers, scissors, glue gun, white satin ribbon 5 cm wide.
2. White satin ribbon is cut into 14 pieces.
3. Each craft is cut 5 cm wide.
4. A round petal is made using the kanzashi method.
5. They stick together.
6. Then the middle is made: a loop is made from a satin cord, and another one is placed on it.
7. The loops are held with tweezers.
8. The right end of the cord is punched through 3 holes.
9. A nodule forms. The edges are singed with a candle.
10. The finished center is attached to the chamomile. The flower is ready!

To make crafts using the second method, you will need a needle, matches, scissors, threads, yellow and white satin ribbons, a glue gun and a candle.

The ribbon is cut into thin strips. The length of the workpiece is 7 cm. The edges are singed with a candle or matches. Each piece is folded in such a way as to form a corner. The petals turn over and the two sides are reconnected. It turns out one big one. You will only need 5 blanks.

The center of the bud is made; for this, a circle of small diameter is cut out of cardboard, and a yellow satin ribbon is glued to it. Now the flower is put together. The petals are placed one on top of the other and sewn on with a needle and thread. The middle is attached with a glue gun. The product is ready.

Craft made from ribbon 0.5 cm wide

To complete the work you will need a white satin ribbon 0.5 cm wide, fabric for the base, a glue gun, scissors, matches, and yellow beads.

The white ribbon is cut into 24 pieces. The length of each piece is 8 cm. Each product is folded in half, with a fold formed in the middle. The edges are melted with a candle. All workpieces are made in a similar way.

Then the base is made, for this a circle is cut out of thick fabric. Diameter 2.5 cm. 8 petals are glued to the base. The rest of the workpieces are fixed between them. After this, the middle is made. The workpiece is coated with glue, and yellow beads are poured onto it. When it is sealed, the remnants are shaken off. Use a toothpick to form a circle.

Satin roses

Crafts made from satin ribbon and buttons

To complete the work you will need a ruler, scissors, small tape, buttons, matches and a glue gun. To make a simple flower, cut the ribbon into 6 or 8 thin strips. The edges are pressed with a match. The ends of the future flower are glued to the center of the workpiece with a glue gun. The elements are glued together to form a bud. A button is glued to the center of the joints.

simple flower

To work you will need scissors, matches, a pink satin ribbon, a needle and thread, a pencil and a glue gun. The pink ribbon is cut into 5 identical strips. The edges of the workpiece are melted by the flame. Using a pencil, make a mark in the center of each part. The edges of the workpiece are fastened with a needle and thread.

The strips are folded in half. A few drops of glue are applied to the inner surface of the product and the sewn part is glued. The petals are strung on a thread and sewn together. A button or large beads are used to decorate the core.

Felt roses

Flowers are made not only from satin ribbons, but also from felt or felt. For such a rose you will need a needle and thread, super glue, blue ribbon, chintz, green felt, and wire.

A loaf of the future product is cut out of green felt. Six petals are made from calico. The wire is wrapped with green tape, the edges are glued with a glue stick. The blanks are folded in half. Along the cut they are strung on a thread. When the fabric is dry, it can be used for work.

Next, they begin to make the bud. To do this, an inflorescence is attached to the end of the wire, and a stem is put through a hole in the felt. The finished petal craft is glued into the center. You can make several flowers and combine them into a bouquet. Tie everything up with a beautiful ribbon. This blank is well suited for a gift.

Pansies

Making pansies is very simple - the craft is done using the kanzashi method. For pansies you will need:

1. Ribbon 3, 4 and 5 cm wide, purple.
2. Tweezers.
3. Beads.
4. Glue.
5. Hairpins.

Squares are cut out of fabric and folded diagonally. The resulting triangle is folded in the middle twice. The edges of the fabric are trimmed and melted with a flame. It turns out to be a petal. Several pieces are strung on a thread and tied together. This method produces a sharp-shaped petal. To make a round petal, the corners are folded towards the center. The same is done on the other side.

Modern trends in needlework allow craftswomen to create real masterpieces and works of art. Recently, making crafts in the kanzashi style has become extremely popular. This Japanese term was originally used to describe hair decoration. What kind of crafts can be made from satin ribbons? Let's talk about this.

DIY crafts from satin ribbon: a variety of options

Modeling crafts in the kanzashi style comes from Japan. It all started when Japanese women made original sharp-angled flowers that served as an accessory for decorating high hairstyles. Over time, our compatriots, as they mastered this direction, began to invent new crafts. In the kanzashi style for hair, you can make a number of accessories:

• headband;
• hairpin;
• elastic band;
• clamp

In addition, crafts made from satin ribbons can be a wonderful design decoration for your interior. Souvenirs are made from them, for example:

• flowers;
• caskets;
• glasses;
• candlesticks;
• butterflies;
• Christmas decorations;
• toys;
• three-dimensional figures;
• Christmas trees, etc.

Of course, it will not be possible to construct a box or candlestick entirely from satin ribbon. In this case, this material is used for decoration with flowers or other patterns.

Kanzashi style flowers: master class for beginners

If you are just learning the basics of creating crafts from satin ribbon, then you should hone your skills in practice. It is best to choose the simplest crafts. When you learn how to correctly and quickly make the main element of a craft - a flower petal, you will be able to complicate the task and create original and unique masterpieces. Flowers are considered a classic of the Kanzashi style. Let's try to build an original rose together.

Necessary materials:

• satin fabric of the required size;
• wire;
• lighter;
• needles;
• threads;
• ruler;
• the fishing line is strong;
• scissors.

Step-by-step description of the process:

The main holiday of spring is March 8th. Many of us try to give our loved ones original gifts made in hand-made style. You can use satin ribbons to make an original card or a voluminous craft, for example, to build a huge bouquet. You can also decorate a flowerpot for indoor or ornamental plants with flowers made from satin ribbons. Think about this topic at your leisure, and be sure to use your imagination when making crafts.

Necessary materials:

• felt or burlap for the base;
• pencil;
• multi-colored satin ribbon;
• scissors;
• threads;
• needle.

Step-by-step description of the process:

To get an original bouquet of such satin roses, you need to make multi-colored flower blanks, as well as prepare the base for the craft. Build a ball out of polystyrene foam and cover it with flower blanks. For the leg, take any sticks or wire wrapped with tape. Use pearls or large beads as decorative elements. This is the kind of original craft you should get.

It is customary to decorate interiors and clothing with crafts made from ribbons. Manufacturing technology has been improving for many centuries. Nowadays, techniques such as kanzashi and quilling are popular. Creating ribbon flowers is an interesting activity for girls and women. Some do it professionally, making videos with master classes. Using the advice of experienced craftsmen, you can create a small masterpiece for your room or a gift for a loved one. With the help of needlework you can not only pass the time, but also improve the appearance of your apartment, as well as learn something new and bring your ideas to life. All work is done in several stages. The first of these is tape preparation and processing. Then the main part of the flower is created. The next stage is the formation of the base and securing the petals to it. After this, the finished composition is decorated.

Advantages and disadvantages of making flowers from ribbons with your own hands

There are many more benefits. Firstly, creating ribbon flowers helps preserve wildlife. The crafts look like real ones - this is the main plus. Making flowers from ribbons is a simple and low-cost way to decorate your interior. They will not wither and will last as long as necessary. Ribbon flowers will be an excellent gift for March Eighth or Valentine's Day. The products are designed in any colors - this is another advantage over living plants. Both adult women and little girls will be interested in experimenting with the shape of flowers and the appearance of the finished composition. Craftsmen have the opportunity to use any decorations at their discretion and create interesting, unique shapes. Products made from tapes have some disadvantages. Beginners need to spend a lot of time to make a bouquet of a large number of flowers. The lack of its own smell is also a disadvantage. Fresh flowers create a special atmosphere due to their aroma, while artificial ones lack such qualities.

Solid ribbon rose

You can use a narrow one and a half centimeter ribbon, then the product will turn out to be small in height and with a dense texture, with a lot of bends. But the best option involves using a relatively wide 4-centimeter tape. First, the protruding threads are torn off from it, and one of the edges is melted with a lighter. The main part of the work begins on this side. The end is folded in half, creating a diagonal fold. The corner is bent downwards, and the process of twisting the core of the rose begins around it. When the diagonal bend is practically no longer visible, you need to turn the ribbon upside down. The folded part is pasted over, after which the strip is turned over again. Then you need to continue to “collect” the flower, repeating these steps after each full revolution. Towards the end of the ribbon, the lower part of the flower begins to form. The tail is pasted over and curled. The product is fastened with thread.

You should not put too much tension, otherwise the craft will not be as fluffy.

The simplest manufacturing method involves the use of scissors, a thread needle, nylon thread, and nylon fabric. The rosette is folded starting from the core. The central part is formed by bending one of the ends of the tape and wrapping it with the opposite, free edge. The resulting layers are pierced with a needle. The remaining free segment is wrapped around the center. With each turn, three folds are made outward. Each of them will form a separate petal. To fix the product, the flower must be treated with thread. There is also a more complex version, for which you will additionally need a sponge, acrylic paints, padding polyester, oval or round shapes, and several pieces of wire. The pieces of wire will be the bases of the individual petals. The molds are wrapped, and fragments of nylon fabric are stretched on top. They are attached with thread. The center is made of colored padding polyester. All that remains is to attach the stem.

Kanzashi (kanzashi) is a type of Japanese jewelry, mainly for women, as well as the name of the technology for making it. Finished products usually consist of flowers and leaves, but other options associated with plants are also found. In total, there are about 5-10 main subtypes of this technique, including tsumami-kanzashi, birakan, mimikaki kanzashi. Not all of them look like a typical modern kanzashi. This method involves using a fire source to give the petals and leaves a characteristic shape. Satin is used as a material for products, and, less often, fabrics with similar parameters are used. In the process of work, you will need such devices as scissors, a glue gun, elastic bands, hairpins, stamens, pins, tweezers. Temperature effects are necessary for manipulating the edges of the molds, as well as for joining them. Small length fragments, most often rectangles, are cut out of satin material. Their corners are connected or trimmed (smooth or rounded).

Simple cinquefoil flower

Since the product will consist only of a cup with petals, it is better to make several pieces. Squares 5x5 or 6x6 cm are cut out of satin material. They are folded diagonally. Then, by bending the corners, a square is made from the triangle. Then it is folded into a triangle again, and a strip 2-3 mm wide is cut from the side with the largest number of free edges. The processed side is grabbed with tweezers, and the workpiece is brought to the candle. The cut edge is melted. Immediately after this it needs to be flattened. You need to wait about ten seconds and begin to give the mold a convex appearance. Then the base is made: an elastic band is installed on the round blank. You need to make cuts and secure it with glue and another circle. Petals are attached to the flat part of the structure, also using glue.

It is better to make flowers in different colors:

• orange;
• pink;
• yellow;
• blue;
• red

Bell

In addition to the main component - the satin ribbon, you will need:

• candle;
• wire;
• stamens;
• sewing equipment;
• suitable glue;
• ruler;
• glass;
• burner.

A 2.5 cm wide ribbon is cut into fragments of 5 cm each. Two pieces are applied to each other with the wrong side. Next they are placed on the glass. Use a ruler to highlight a diagonal line. All fragments are cut with a hot knife. After this, they are soldered along the cut line. The short edges are first stitched separately with thread and then joined together. After this, the front side of the sharp part of the connected petals is melted with a candle. Deformation due to temperature effects should not be allowed. Next, the end is quickly twisted so that it bends outward. It is necessary to make five such elements to create one flower. Then you need to work with the stamens: they are bent in half, covered with wire and twisted. The tops of the stamens are smeared with glue and five petals are attached to them.

Aster

You will need: thread and needle, several beads, lighter, scissors, green mesh, satin ribbon, thick cardboard, glue gun. It is not necessary to choose natural tones to create a flower; any bright shades will do. First of all, the tape is cut into a large number of segments: thirty or more. Its width should be 2.5-3 cm, the length of the fragments should be 6-7 cm. Each piece is folded in half - into a narrow strip. Then a small fragment is cut off from one end with scissors. This should be done at an angle of 45°. The cut edge is melted with a lighter and glued together. Two opposite corners are folded inward and melted by fire. And so 30 petals. Then a small circle is cut out of cardboard. It is covered with satin material. Two rows of petals are glued to this base. Some add variety and create another row in the middle, in a different color. The finished composition is decorated with beads.

Peony

You will need: a base for a brooch, a ribbon, a large bead, a needle, beaded or monofilament, scissors, tweezers, a candle, matches. Circles of different sizes are cut out of the tape. The splendor of the final product depends on their quantity. All elements are melted by candle fire. It is necessary to achieve a wavy outline along the entire perimeter of the future petal. After this, they form a bottom. To do this, make a small cut so that approximately 1/5 of the circle is a straight line. The next step is to sew several petals into groups. The circles are combined in sequence from largest to smallest. Next, the central part of the flower is created using a thread: a large bead is attached to the base under the brooch. After this, petals are attached to the product. Now it can be used as a brooch or hairpin, or made into an elastic band.

Hibiscus

You will need:

1. Scissors;
2. Candle;
3. Super glue;
4. Template with side 6 cm;
5. Thin floral wire and two satin ribbons of different colors - one will imitate a flower (it is better to choose pink), and the other a stem.

You will also need stamens to match the color of the pink ribbon. First of all, cut out a 6-centimeter rectangle from green tape. On one side, it needs to be given the appearance of a leaf: two corners are cut off with scissors. One such element is enough. You need to make five petals from the pink one. Using a template, the required number of pieces is measured and cut. Molds resembling a drop are cut out of the fragments. One of the edges is rounded. It is difficult to cut out the ideal shape, so you need to put all the pieces together or use another template in the form of the desired petal. Next, the flat side of the leaf is melted. The petals are treated with fire along the entire perimeter, the rounded part is then stretched by hand. Then all the fragments are put together and fastened. The stem is decorated with green ribbon. A leaf of the same color is attached to it - the product is ready.

Flower made from wave braid and zigzag braid

Very original products are created from wavy braid. You will need a needle and thread, scissors, one wave braid 50 cm long or two 30 cm long (preferable). First of all, the two sections are intertwined, like curls in a braid. This blank is sewn on a machine. Then a bud is made: the braid is rolled up and secured with glue in several places, preferably once for each turn. The end is tucked in and also fixed with glue. In this form, the product will imitate a peony, and if you turn out the petals, it will resemble a rose. A very original non-standard product will be made from zigzag braid. A segment with 20 bends is required. The ends of the fragment are sewn together. For this, an allowance is left in advance. Then, using a thread, you need to sew 10 elements (one at a time). Then this ring is assembled into a compact circle and secured. Then it is made flat, and as a result all the petals will be directed clockwise or counterclockwise.

You will need a fastener (elastic band, hoop or hairpin), thread to match the color of the lace, a fleece circle of the same color, 2 meters of lace. The first step is to prepare the material and fastening. Then the lace is sewn along a smooth, non-decorative edge with a needle and double thread. A “forward needle” stitch is used. The thread stretches and the lace fabric tightens. The folds are distributed evenly along the entire length of the tape. There is no need to separate the needle and thread. They are attached to the end of the lace for a while. Next, you will need a second needle and thread: it is sewn to the fleece circle in a spiral. It is necessary to ensure that the lace “looks” face up. The core of the flower is decorated to your taste: with buttons or beads. From the remaining lace fabric you can make a mini-bud and sew it to the central part of the product. The first thread is now secured and cut - the job is complete. It is worth special mentioning the appearance of the products. Flowers made from a thick lace ribbon with decorations with ornamental stones look very original.

Many remember them from childhood: birthdays, New Year and the Feast of St. Nicholas were rarely without these decorations. They are easy to do. 9 strips 1.5 cm wide are drawn on a sheet of paper. They are cut out and then reduced to the required size. You need 3 pieces with a length of 25 cm and the same number of 22 cm, two of 19 cm and one strip 9 cm long. The shortest one is bent into a ring and fixed with a stapler. All the rest are twisted in a figure eight and also secured. The fragments are stacked on top of each other. There will be small “eights” inside the bud. A ring is placed in the very center. Pieces of double-sided tape can be used both before starting to create a bud to create an adhesive surface on the fragments, and after, for reliable fastening. The paper itself can be different: simply colored or decorative with various stripes.

To create such a product yourself, you will need to use:

• paper;
• scissors;
• ruler;
• pencil;
• stapler;
• Double-sided tape.

You will need eight ribbons, four blue and the same number of purple. Each should be 15 cm long and 0.6 cm wide. First, the purple strip is folded in half, and the top of the folded end is smeared with glue and attached to a soft round base, exactly in the center. Then the remaining purple ribbons are glued on. This is done in such a way that there is an equal distance between the ends of all strips. After this, 8 drops of glue are applied to the central parts of these “rays”. The end of one protruding strip is attached to the center of the adjacent one and so on throughout the circle. This part of the work must be done very slowly, otherwise the petals will not be the same. Next you need to work on the blue stripes. They are attached on top of the purple ones, and then their edges are drawn through the loops. Then the blue ends are twisted in the same way as the purple ones.

Packing tape for making flowers

To create this craft, you will need a needle, floss, tailor's pins, a round metal template with protruding knitting needles, and the packaging tape itself (you can choose simple transparent tape). First, a template is taken and a ribbon is gradually wound around it. The stitches should be placed on the opposite edge of the needle. When the tape is completely wound, the center is highlighted. To do this, you need to connect the petals in the middle using a needle and thread. The center is darned in a circle. The free edge of the tape is cut to fit the central part. The petal is removed from the needles - all that remains is to decorate the flower. The craft should be decorated with decorative elements. You can spray paint it. A monotonous color will look best, but it’s worth trying to use different molds and color the flower in an original way, for example “polka dots”. There are also a variety of colored packaging tapes on sale - regular and festive.

It’s worth trying to make a complex craft using ribbons of different widths and thicknesses and with different weaves.

Rep ribbon flower

Such products can be found on children's clothing: sundresses, dresses. Creating a craft from grosgrain ribbon will be easy even for a beginner. You will need thread, scissors, pencil, glue gun, candle, grosgrain ribbon. First, 5 strips of the same length are cut out (approximately 5-6 cm). The edges are processed over fire. Then the fragments are shaped into a bow by gluing the opposite edges in the middle. All bows are folded in half. After this, they are stitched with thread on the flat side and gathered into a circle of five petals. The bud they create is fastened and decorated with a button. The petals are given volume. There are even simpler methods. The tape can be applied several times, creating a thickening in the center. Then you need to fasten everything with threads and decorate the product with a button. Another interesting way is to create petals from several turns of different sizes.

Both small flowers and large ones with a diameter of more than half a meter are created from this material. The latter are created from foamiran (isolon) - polypropylene fiber. You will need large round sheets with a density of 30, paint, a glue gun, and a hair dryer. You can cut the blanks yourself from a large canvas. Thanks to the pliability of the material, this will not be difficult. First, two rounded petals with a long side of about 30 cm are cut out. The core will be made from them. All other fragments should be larger: 35, 40, 45 cm, etc. The lower parts of all elements are cut noticeably narrower. During the work process, these segments are pasted over with a gun and bent. If on the first petal the bottom is twisted and secured, then on the next petals it wraps around the already created structure. The desired shape is given by hand and after each change it is fixed with a hairdryer. When all the petals are ready, you will need to make a core from a spool of thread. Then the flower is painted.

It is necessary that the air from the hairdryer be as hot as possible, otherwise the flower may begin to quickly lose shape or may not turn out at all.

Application of ready-made colors

Such crafts decorate everyday and festive hairstyles. To do this, flowers are attached to elastic bands, headbands, hairpins and decorated with beads, brooches, and various small elements. Ribbon flowers with pins are used to decorate wardrobe items. They decorate lapels; put in pockets, attached to hats. Ribbon flowers will become bright gifts for various occasions - birthdays, New Years, religious holidays, angel's day. These crafts are used to decorate various homemade compositions, topiaries, and gift boxes. Hand-decorated rooms are a great place to decorate with bouquets and photo frames with ribbon flowers. You can also trim floor lamps and tulle. Recently, boutonnieres and duplicate bouquets made of satin material have become popular. They are bought not only for special occasions.

Conclusion

Flowers made from ribbons are sometimes difficult to distinguish from real ones. A beautiful composition can be created from a simple paper or lace ribbon, or using the kanzashi technique from a satin one. Ribbon flowers are mainly intended for decorating hair - they can be given to women and girls. To create a flower, you need to go through a few simple steps. First, the ribbons are prepared for processing. Excess threads are torn off from them, and uneven edges are trimmed if necessary. Next, the process of twisting or stitching begins. This is done in different ways, depending on the technique of execution. The resulting shape is usually held together with threads, glue or wire. Flowers are decorated with brooches, beads or left untouched to imitate real flowers. The color is selected at the discretion of the master. The result is a “self-sufficient” decoration that can also be used as a decorative element.

Suddenly you want to start doing something exciting, but don’t know what? There are many types of different crafts: made from beads, paper, plasticine and fabric.

But why not pay attention to such material as tapes? They have many advantages, such as being cheap and accessible.

Agree that it will not be particularly difficult and costly materials for this kind of hobby, and besides, it is an excellent gift for any celebration. Do not hesitate, in our article you will find many ideas for crafts made from ribbons, which you can easily bring to life.

Advantages and pleasant “bonuses” of working with tapes

Recently, crafts made from ribbons have attracted active attention and demand. And this is not surprising, because this type of creativity does not cause any particular difficulties in execution and selection of material. Ribbons are sold at any hardware and sewing supply store and cost pennies.

If you are an active mom and like to do new things with your baby, then this activity is for you. By making at least one craft, you will give your children invaluable experience in working with thread and needle, and will help in the development of fine motor skills and imagination.

In addition, you can improve your old clothes, accessories and household items. Below are photo examples of ribbon crafts that were made together with children.

What do you need?

Everything is very simple, because all you need is needles, threads and ribbons of any color and width. If you want to create a picture, then you will need to purchase a fabric that is strong enough that will pass the needle and ribbon without much effort.

Several types of fabrics are suitable for this: canvas (used in embroidery) which already has a pattern on it, for those who are just starting out, or without a pattern. You can also use ready-made accessories or clothing items (case, pillow, glove, elastic band, dress).

In the world of ribbons, you are given a huge selection of colors and fabric materials such as satin, pleated and silk. It is satin ribbons that often attract lovers of high-quality and durable work with their shine and durability.

To choose a needle, you should be guided by the width of the eye; when purchasing a needle, it is advisable to take with you the tapes that you will use in your work and check whether it is convenient for you to work with them.

Please note that for this type of work you will not need a perfectly sharp needle, it is better to use a needle with a blunt tip as it will not tear the threads of your main fabric. To secure the edge of the tape, a regular lighter is usually used.

Thus, to make a craft from ribbons with your own hands you will not need to spend a lot of time and money, and in return you will receive an original hand-made interior decoration or a gift to your loved ones.

From basics to perfection

The variety of tape making techniques ranges from simple ones that even children can do to more complex ones. First, you need to understand the easy version of crafts made from ribbons, such as decorating hairpins with various bows and flowers, weaving bracelets, and decorating wardrobe and household items.

Artificial flowers made from ribbons

The most popular option is to make various flowers for decoration and gifts. Let's start with a simpler technique with a detailed description for beginners:

• Take a satin ribbon of the desired color and fold it into an accordion.
• Cut out a piece in the shape of a flower petal
• Do the same as in step 1, only with a different color of ribbon, which will play the role of leaves in your craft.
• Cut the piece into a leaf shape
• Burn the edges of the parts and glue the flower-shaped petals and leaves separately
• If desired, decorate with rhinestones and sequins

Attention! Do not leave children unattended with flammable objects.

So, we have mastered the simplest technique of making a flower from ribbons and now we can begin more complex manipulations using folds, glue and a lighter.

To make a rose we will need: a satin ribbon of any color 5 cm wide and approximately 90 cm long, a lighter, tweezers, scissors, glue.

Stages of work

• We cut pieces 5 cm thick and 11 cm long, of which we should get 8 pieces
• Take the piece and turn it wrong side towards you, then bend the top edge by 0.5 cm
• Fold the top right corner into the center
• Then we also wrap the lower right corner into the center, and cut off part of the lower corner at an angle of 45 degrees (use tweezers for convenience). Burn the resulting edge with a lighter.
• We repeat the same with the left side and secure it with a lighter.
• As a result, we get 8 petals

Assembling the bud

• Take glue and drop 1 drop onto the edge of the petal (it is advisable to use a “glue moment” or a glue gun), then roll the petal in a circle, forming a bud
• Secure with glue from the second edge of the petal
• We take the next petal and drip glue onto the edge, take the ready-made bud and begin to wrap it with the petal, and secure it with glue again on the other edge.
• Thus, we form a rose flower, doing the same with the remaining petals. Don’t be afraid to use your imagination and deviate from the rules, because this is your creativity.

Popular kanzashi technique

We are gradually gaining experience in working with tapes and approaching more complex techniques. I think you have more than once noticed on the Internet beautiful photos with bouquets of artificial flowers, beautiful hairstyles with unusual hairpins and accessories - all this is handmade using ribbons using the kanzashi technique.

For this work, blanks in the form of squares are used, cut and burned along the edges. They make petals, which come with sharp and round edges, and then form them into a flower using a thick thread.

Next, glue the flowers to a base made of cardboard or thick fabric. These flowers can be transferred to any accessory (hat, case, bag, shoes) or made a beautiful panel on the wall. To complement the look, many people attach rhinestones or sequins to the flowers.

You can understand the manufacturing technique in more detail by watching a video with a master class from real needlewomen.

Photos of crafts made from ribbons

A ribbon flower is a beautiful decoration that you can easily make with your own hands. Can be used not only to decorate a gift, but also as a gift in general. Everyone can learn, the main thing is a little patience and time. Before you make a flower yourself, prepare all the necessary materials for work and follow the suggested master classes: the result will delight you with its elegance and versatility.

Making a bud from satin

A master class that clearly illustrates how to make a flower from wide-sized satin ribbons is perfect for beginning needlewomen. The width of this material is 5-10 cm. Satin material is offered in a huge variety, so choose your favorite colors.

Advice

If the product is intended for a brooch, purchase brightly colored material. When making a bud to create a composition or textile bouquet, choose shades that are compatible with each other.

To make it you will need a two-meter roll of satin ribbon 5 cm wide, a piece of paper, a simple pencil, a lighter or matches. You will also need a needle and thread of the appropriate color. Instead of a lighter, experienced craftswomen use a tea candle - it is small in size and convenient for scorching the edges.

From satin ribbons

Master Class

The master class consists of the following simple steps:

• Making the base. The first thing you need to do is make a petal template. To do this, take a sheet of paper and draw a petal of the desired size on it. To make the edges of the petal even, fold the leaf in half and cut 2 layers of paper at once in the form of a drop.

• Preparing the petals. Cut the material into pieces of the required size in the form of squares or rectangles. Trace the prepared paper template on each piece and cut out the petals. The output should be about 30 petals.
• Petal formation. Fold the petal in half a little, light the candle and bring the piece to the fire. The material begins to curl before your eyes: you need to achieve the effect of a twisted petal. Do this with all the preparations.
• Bud formation. When the petals are formed, we move on to making the product itself. At this stage, choose one of the two proposed torsion methods. The first involves assembling on a thread with a needle: just put all the petals on the thread and tighten it at the base. The second method is suitable if you plan to make a stem: a ball of foil is glued to the stick, and the petals are attached to it using hot glue.

Buds made of paper fit almost anywhere: the bouquet looks perfect in a vase in the kitchen, in the hallway, or on a cabinet in the living room. To work, you will need a standard set of materials used in labor lessons at school. To make your own paper flower, prepare the following materials:

• sheets of colored paper in several shades;
• scissors;
• bamboo sticks;
• PVA glue or hot glue with sticks.

From paper tape

Master Class

The choice of glue depends on the type of paper used: if you choose thick paper like cardboard, it is better to take hot melt glue, it holds the petals together more reliably. If you use regular school paper, PVA glue will do. To decorate the stem you will need green corrugated paper.

The process of making a carnation or rose from paper is so fascinating that you may not notice how time flies. It’s especially fun to twirl the product with children, and the choice of color inspires the baby the most. First, cut the paper into strips 3 cm wide - this is the most optimal size for blanks.

Further work will go faster if you prepare the stem in advance. To do this, cut a piece of corrugated green paper and cover a bamboo stick with it. Then take a piece of paper tape, glue its tip to the stem, and begin to wrap the flower in a spiral.

In this way, you can wind about 10 parts in 1 hour, which is already a full-fledged interior bouquet. The craft will be a good composition option for a gift, and will also amaze the child with its beauty and ease of production. Flowers made from paper in pastel colors look beautiful in combination with contrasting shades.

Kanzashi flower

To better understand the kanzashi technique, it is proposed to consider two options for making a flower: the first will be intended for beginners and involves the use of thread and needle. Second master class based on the use of the technique of separately forming petals by folding. After studying these two options, choose the most convenient one for yourself and start creating a stylish and delicate bud.

Pink flower using kanzashi technique

The first master class will help you create an original flower with your own hands, reminiscent of a delicate chrysanthemum. It will be a good addition to a hair tie, headband or hairpin. Manufacturing consists of simple steps that do not require preliminary preparation of individual petals.

To make a kanzashi flower, prepare a pink satin ribbon 2.5 cm wide, its length should be 1 m. You also need scissors, thread with a light-colored needle, a lighter, a felt circle, hot glue and a small bead or rhinestones.

Kanzashi flower

Master Class

The work consists of several stages:

• Preparation. Cut strips from a common skein of material, their edges should be smooth. To do this, take a lighter and scorch the working edge.
• Formation of the first petal. Take the material with the wrong side facing you and wrap it at a right angle. Lower the material down again, fold the free short edge over the front part. This is how the first petal is formed, which is attached with a needle and thread at the base.

• Making a pink kanzashi flower. Next, the strip must be raised up and lowered down. After this, turn the material to the right and fold it inward on the left side. A visible triangle has formed - this is a flower petal; it also needs to be strung on a thread.
• Final processing. When all the petals are formed and strung on a thread, the finished bud is straightened. The end and beginning of the work must be secured with hot glue. Glue the selected bead to the center of the decoration.

The delicate and elegant flower is fixed on a felt base so that it can be used for other purposes in the future. The product can be used to successfully decorate not only hair accessories, but also brooches and belts. The kanzashi flower will be an appropriate addition for tacking up curtains.

Kanzashi flower from a wide ribbon

A master class on an elegant bud made from a wide satin ribbon has already been presented above, but it was based on cutting out each petal separately. The technique involves folding several times and then firing the edges. The finished flower turns out delicate and is also used to decorate the interior or hairstyles.

To make an elegant and simple kanzashi bud we will need:

• 7 pieces of satin 5x5 cm;
• scissors;
• lighter;
• thread with needle;
• glue gun

Also buy a half bead: it is better if it has a contrasting color. For ease of work during the process of singeing the edge, it is recommended to use long medical tweezers with curled ends.

It is better to take the material of one shade - select it depending on the intended purpose of the flower. If you take different colors, it is recommended to alternate them with each other.

When all the materials are ready, we begin the creative process: we take each piece and process it with a lighter from all sides. This is necessary so that it does not bloom in the future. A step-by-step master class is described below.

The flower turns out to be pretty, and the simplicity of its production allows you to make several buds at once in a short time. They will perfectly diversify your home interior if you place them on the curtains in a girl’s children’s room. Flowers will look appropriate in the composition of a gift.

Chamomile from a narrow ribbon

You can create beauty not only from wide satin ribbons, but from smaller materials. We will talk about making an attractive chamomile bud from a narrow material. This option is well suited for a brooch.

It is worth immediately noting that several types of flowers can be made from narrow strips: with round and sharp petals. The round petals resemble open chamomile buds, and the pointed petals resemble an aster. Z A master class with round petals will be described here, as it is suitable for novice needlewomen to work with their own hands.

Prepare the following creative materials:

• 4 pieces of blue tape 6 mm wide and 15 cm long and the same number of pieces of pink material;
• felt circle or cut out the base from felt yourself;
• glue gun and thermal sticks for it;
• tweezers for creativity with curved edges;
• beads or a group of beads to form the core.

The work will be so simple and exciting that you may not notice how time flies. First, you need to fold each piece in half - this will make it easier to work with the material. Glue each pink piece in the center to the middle of the felt base so that you get a snowflake with six rays.

From a narrow ribbon

Master Class

At the next stage, use glue to fix the ends in the center: it is important here that each petal is folded in one direction. Next, take the blue ribbons and also glue them in the shape of a snowflake with rays from the center. Thread the ends into the resulting holes of the pink petals.

Everyone knows a bright and versatile material - packaging tape. With its help, florists and designers create incredible compositions of real flowers, bouquets, and also pack gifts using special paper for the base. From this material it is very easy to make an attractive rose with your own hands, which will become an element of a panel or decorate the interior.

Everything you need for the job can be found at your nearest florist shop. It is better to choose a bright ribbon so that its edges are framed in a contrasting shade: then the finished rose will look elegant. Prepare packing tape 5 cm wide, its length should be 70-100 cm, as well as scissors, wire for the stem and a glue gun.

Bright and versatile material

The master class consists of the following stages:

• Initial torsion. Take the edge and fold it towards you so that you get an isosceles triangle. The resulting tip should protrude slightly beyond the line. Next, begin to twist the edge, forming the middle of the bud: on the other side you get a tube into which you can later insert a wire.
• Formation of the product. At the second stage, it is necessary to wrap the workpiece so that petals are formed. To do this, fold the protruding edge inward so that the front part is at the top. Continue twisting the rose, and when you reach the end of the bend, fold the ribbon again - this time inside out.
• Making the stem. After each bend, glue the flower for secure fixation. When the rose is ready, insert the prepared wire into the lower tube: if necessary, paint it green.

Lush roses from nylon ribbons

Handmade artificial flowers have not left fashion trends in the design of evening dresses and home interiors for a long time. If previously a product was considered a sign of a person’s inability to purchase a finished item, today handmade items have acquired value. With the help of an elegant small bud you can easily decorate any composition.

The options for using organza rose buds are varied; they can be used to decorate:

• wooden jewelry boxes;
• decorate photo frames;
• decorated with topiary.

From nylon tapes

Master Class

Homemade flowers look great on greeting cards, gift boxes. The master class does not contain complex steps, since the material is easy to process.

Organza is made from polyester and viscose, which adds plasticity and shine to the material at the same time. For work you will need the following materials:

• nylon ribbon or organza 2 cm wide, 130 cm long;
• wide satin ribbon 4 cm wide, dark green, for leaves: synthetic lining fabric can be used instead;
• several stamens - they are sold in art and florist stores;
• felt circle with a diameter of 3 cm;
• scissors;
• lighter;
• hot gun;
• thread with needle.

A simple master class will surprise you with how quickly you can make rose buds: they turn out delicate and beautiful.

Stage	Description
Preparation	The edges of the material must be immediately treated with a lighter to prevent the threads from unraveling.
Forming a rose	Take the edge and fold the corner. It must be sewn with thread using a regular stitch. Then fold the ribbon running 2 cm in front, make a triangle, and sew. This is what you need to do with the rest of the tape.
Bud twisting	Starting at one edge, carefully twist the material in one direction, periodically fixing it at the base with glue
Creating leaves	Cut the wide ribbon into 4 cm squares. Bend each square diagonally three times, singe the edges and turn the sheet inside out

At the end of the work, fix the leaves at the base of the bud, and also stick on a felt circle. To place the stamens in the center of the rose, they need to be glued inside using hot glue. A little effort, time and the rose is ready: now it will definitely lift your spirits.