The best bead crafts for beginners. Original handmade crafts from what you have What to make from beads with your own hands

Beaded beads are one of the most beautiful and useful materials for creativity. We offer you a simple master class for beginners, which will be useful for every craft lover. Over time, you can improve the technique, add something of your own to the lesson and completely adapt it to suit you.

Crafts are made in the shape of a flower, and their scope is very wide. You can use ready-made homemade beads as buttons for clothes or fasteners on accessories. In addition, you can use these original beads to make a bracelet or necklace with your own hands. They can also be an excellent basis for earrings, a ring, a brooch, a hairpin or a hairband.

In short, there are many options. The determining factor in this case is the size and shape of the beads. You can place a large flattened bead in the center and arrange small ones around it, or make a flower from beads of the same size.

What do we need?

• beads for the central part of the flower
• beads for “petals”
• beading wire
• wire cutters, safety pin

How to do it?

Place a bead on the pin, which will become the central part of the flower. At a short distance from it, make a one-time winding of wire around the needle.

Place five (more/less depending on size) beads on the free end of the wire. Be guided by the fact that this part should go around exactly half of the central bead.

Make another single winding to secure the petals.

Repeat the procedure with the other end of the wire and the rest of the “petals”.

Then start winding the resulting bead.

Move to the opposite edge and make crosshairs.

If you have free time and a little patience, then bead crafts will interest you. Since from this material you can create various crafts with your own hands: jewelry, decorative items, embroidery, mosaics, keychains and much more. In this article we will tell you about several options for DIY bead crafts for beginners, children and experienced craftsmen. Let's now take a look at our craft options and try to make them.

The Beads 2.0 program for creating knitting and bead weaving patterns!

Anyone who wants to weave something of their own out of beads, or perhaps even create a pattern for embroidery/weaving from a photograph, should try the Russian-language program “Beads 2.0”!

Here is the program’s website, all its capabilities are described in detail: programma-biserok.ru

But I’ll still explain it in a few words.

Firstly (and this is its main purpose), with the help of “Bead” in a couple of seconds you can create a full-fledged bead embroidery/weaving pattern from any of your photos or pictures! You no longer need to embroider other people’s ideas for ornaments or according to other people’s patterns - now you yourself can bring to life any of your ideas, any drawing, or even embroider a photo!

The most important thing is that after creating the pattern, the program will indicate the specific catalog numbers of the Preciosa/Gamma beads required for embroidering/weaving this pattern. You just need to come to the store, buy the desired beads according to the list provided by the program - and you can get to work today!

With “Beads” you can either create a diagram from a photograph/picture or draw your plot “from scratch”. The program provides the ability to fully manually edit any automatically created diagram. When creating, you can choose the type of future scheme - regular or brick diagram. If you plan not to weave your work, but rather to embroider it on fabric, the program always provides a complete pattern for printing on fabric. Everything is as in the purchased set!

The program has an interface entirely in Russian, installation of the program on your computer is carried out “in one click”, in addition, Russian-language instructions are built into the program, and you can always ask for help from technical support on the program’s website (or even call them toll-free number 8 -800 indicated on the website).

In general, if you have ever had the idea of ​​embroidering or weaving something of your own with beads, I advise you to get acquainted with the Beads program.

DIY beaded birch

Now we will look at how to make a birch tree from wood, which will then serve as decoration for your interior. Let's get started with the process of making this DIY craft.

You will need:

• Thin wire (0.3)
• Medium thickness wire
• Green beads (3 shades)
• Yellow beads
• Scissors
• Crepe paper white
• Foil
• Putty
• Brush
• Paints
• Decorative moss

Progress:

1. We need to mix all the beads in one container.
2. We cut off a piece of wire (about 60 cm) and make a loop on one side, twisting it so that the beads do not fall off.
3. Now we string the beads onto the wire in a chaotic manner. We lower the wire into the jar with beads and string the beads with piercing movements.
4. The length of the strung beads should be approximately 15 cm.
5. Next, we separate 7 beads from the total mass and drag them to the extreme part of the wire. Using a twisting motion, close these 7 pieces with a loop using a twisting motion. So you need to do about 5 turns.
6. We do the same with all the remaining beads on the wire, keeping a distance between the loops of approximately 1 cm. This will be our branch. We need about 60 of these branches.
7. From these blanks we make full-fledged tree branches, collecting several pieces at a time and stacking them at different levels. To do this, take 3 branches and connect them together, fastening them and winding them on a common wire of slightly thicker thickness.
8. We cut the crepe paper into strips approximately 1.5 cm wide. Wrap the wire around our branch so that it looks like tree bark. Use glue to fix it.
9. We do this with all the branches.
10. We begin to form the tree. We take a thicker wire, it will serve as the basis for the tree, and fold it in half.
11. We begin to attach tree branches to the wire, securing the branches with tails. We do this with a twisting motion.
12. This is how we attach all the branches to the trunk.
13. Cover all branches with foil.
14. We dilute the putty and place it on the base for our tree.
15. Place the tree trunk in the solution and level the mass. To fix the tree, place any object under it.
16. Now apply putty solution to the trunk. It's better to use two layers to make it thicker.
17. When the solution has hardened, paint it with white paint. Make spots on the trunk with black paint.
18. Remove the foil and straighten the branches of our tree.
19. Glue moss onto the base for the tree so that it looks like the ground where the tree grows.

Video on how to make a birch tree from beads with your own hands

Craft "Apple"

This craft will be interesting for beginners. You can make it yourself, because the assembly diagram is simple. You will have a good evening doing your favorite activity. Let's look at the diagram with step-by-step instructions that we have prepared for you.

You will need:

• Beads red, yellow and green
• Thin wire
• Scissors
• fishing line

Progress:

1. You need to start weaving this craft from the bottom. We string 3 beads onto a fishing line, after which we begin to make rows in the following sequence:
2. 1 row – 9 pcs.
3. 2nd row – 12 pcs.
4. 3rd row – 14 pcs.
5. 4th row – 17 pcs.
6. 5 row - 17 pcs.
7. 6th row – 16 pcs.
8. 7 row – 15 pcs.
9. 8 row – 12 pcs.
10. 9 row – 9 pcs.
11. You need to start weaving from left to right.
12. The craft ends with the tail of an apple. It is made with three beads.

New Year's toys

To decorate a room for the New Year, you can use a garland of beads and disks. Children 4, 5, 6, 7 years old can handle this craft. It is simple to make, but looks very unusual and elegant. It can decorate both a children's room and a living room.

You will need:

• Beads of various colors
• Old disks
• fishing line

Progress:

1. To make this, you need to cut the disk into even small squares.
2. First of all, a piece of disk is strung on the fishing line, followed by 6 beads of different colors, then again a piece of disk.
3. You need to repeat this at least 10 times so that the Christmas tree toy looks decent and beautiful. You need to make a loop at the top of the craft. A wonderful bead craft for beginners.

Mobile phone pendant

You can decorate your mobile phone with a pendant made of beads and beads. It will be an excellent decoration, and you can also give it as a gift to a friend or mother. It’s very easy to make this craft with your own hands, just read the step-by-step instructions.

You will need:

• Blue silver beads
• fishing line
• Swivel with loop
• Scissors

Progress:

1. Cut a piece of fishing line and fold it in half.
2. We string 2 blue beads on one side of the fishing line, and with the other side we thread these beads on the other side.
3. Next, string 2 silver beads on each side of the fishing line.
4. Then you need to string two blue ones again, threading them with fishing line on both sides.
5. Repeat all steps until you get the desired length of the craft.
6. Now let's finish it by stringing 3 silver beads on each side of the fishing line.
7. Attach a swivel with a loop to the tip of the blank so that the pendant can be attached to the phone.
8. In the same way, you can make various pendants by changing the colors of the beads and the weaving methods.

Snowflake made of beads

In winter, you can decorate windows or a New Year tree with this craft. It can be made in various shapes or sizes, it all depends on your imagination. Now let's look at the diagram with step-by-step instructions for making a snowflake that we have prepared for you.

You will need:

• Beads blue and transparent
• Wire

Progress:

1. Pick up 4 transparent and 1 blue beads, then 2 transparent and 1 blue.
2. Now step back 15 cm from the beginning and use the end of the wire to pass in the opposite direction through the last 3 beads (2 transparent and 1 blue). We do this two more times.
3. Now we collect 1 blue, 3 transparent, 3 blue, 3 transparent. Now we pass the tip of the wire into the first blue bead, so a circle is formed.
4. Repeat step 3, only with the second end of the wire.
5. Now we pass the wire back through 4 transparent ones.
6. We dial: 1 blue, 3 transparent and go back.
7. Repeat step 6.
8. On the long side of the wire we string 4 transparent, 1 blue, 3 transparent, 1 blue. Hold one part with your hand, and for the second, dial 6 white ones.
9. Pass the wire through the last blue bead to create another circle.
10. Next, we collect 1 blue, 6 transparent and make a ring. Now another ring.
11. Pass the wire through the blue one, 3 clear ones and the next blue one.
12. Add 3 more clear beads and pass the wire through the first of the last two blue beads. We have one part of a snowflake with two branches.
13. Now we repeat these 5 parts.
14. We fasten all the blanks carefully in a circle with wire and we will get a six-pointed snowflake.

Video master class snowflake made of beads

Brooch "Dragonfly"

If you love jewelry, then I would like to invite you to make a beautiful beaded brooch in the shape of a dragonfly with your own hands. Its execution principle is very simple; this craft is designed for children and beginners.

You will need:

• Wire
• Beads yellow and green
• Large green bead - 2 pcs
• Pin

Progress:

1. We collect a green bead, then a bead and another bead.
2. Next, string the green bead again and pass the other side of the wire through it. Now bring everything down to the middle.
3. Let's make paws. Place a green bead on one end of the wire and secure it with a twisting motion. We make the foot on the other side in a similar way.
4. To make wings on one end of the wire we need to string yellow beads, at the beginning we need to string them alternating with 3 green ones.
5. We fix the wing by twisting 2 wires together.
6. We also make the second wing.
7. We need to make the lower wings. They are made in the same way as the top ones, only smaller in size.
8. For the body, we need to string a green bead onto both wires.
9. We make the lower legs in the same way as the upper ones, only a little longer.
10. Take the pin and straighten it.
11. String 6 green beads onto a pin and give it the same shape.
12. Pass both sides of the wire through all the beads on the pin.
13. Next, string 7 more beads onto both wires and close the craft by passing the end of the wire again through the last bead. Do this several times.
14. The brooch is ready!

Video on how to make a brooch with your own hands from beads

Beaded necklace

I would like to offer you another decoration option, but in the form of beads. They are made very simply, but they look very unusual and beautiful, like a braid. And now we will look at step-by-step instructions on how to make such beads with your own hands, with photos and video descriptions.

You will need:

• Blue beads
• fishing line
• Bead Clips
• Connecting ring - 2 pcs.
• Jewelry carabiner

Progress:

1. We take a fishing line of the desired length and string beads on it; calculate the number of beads for yourself as desired.
2. Once you have your beads strung, secure the bead clip to the string using an extra bead.
3. Now, holding one free end, begin to string the beads onto the second side of the fishing line after clamping.
4. On the other side, secure the clamp in the same way.
5. Cut off the excess line.
6. We need to make 3 such parts.
7. On one side, we connect our blanks together with a ring.
8. We braid a tight braid from bead blanks and also secure it with a ring at the other end.
9. Now attach the carabiner and our beads are ready!

Video on how to make a beaded braid with your own hands

Beading is a fun activity for adults and children. It perfectly calms the nerves, develops fine motor skills and qualities such as patience and perseverance. Crafts made from many small beads can become interesting decorations in the interior of your home and even exclusive handmade gifts.

Psychologists recommend weaving with beads during depression, apathy and bad mood. Activities such as knitting, embroidery, and beading stabilize the nervous system and help get out of a stressful state. Bead weaving is also recommended for hyperactive children and children with speech disorders.

We have collected several types bead crafts of varying complexity with schemes that we think may be of interest to you.

Beaded violets

Necessary materials:

• green beads;
• yellow beads;
• blue beads (can be replaced with purple, pink, white);
• wire cutters;

• floral green ribbon;
• small flower pot;
• foam according to the size of the pot.

The process of making decorative violets consists of five stages. To learn how to make such a bead craft, check out the step-by-step instructions with pictures.

Children should weave crafts from beads under the careful supervision of an adult!

Flower

Stamen

Leaflets

To make the beaded flower more realistic, we will need leaves of three sizes.

Making stems

We need to decorate the stem of each of the flowers and leaves. For this take a green floral ribbon, tie a knot near the flower (leaf) itself and wrap the stem. We secure the ribbon at the end with a knot so that it does not unravel. The total number of stems should be seventeen.

“Planting” flowers in a pot

1. We collect a “bouquet” by wrapping the stems of violets and leaves together. Try to distribute all parts of the composition evenly.
2. We take the foam and place it in the pot.
3. We stick the stems of our artificial plant into the foam so that it is firmly fixed in the pot.

We made such a wonderful craft from beads with our own hands, the simple scheme of which is even possiblefor beginners.

Craft “Dragonfly”

The beaded dragonfly is made using the parallel weaving technique. You can choose the color of beads for crafts at your discretion.

To work we will need:

• gray beads;
• orange beads;
• 2 beads with a diameter of 6 mm;

• beading wire;
• wire cutters

1. We start weaving from the head of the dragonfly. We collect materials in the middle of the wire in this order: 1 large bead, 1 gray bead, 1 black bead, 3 gray beads.

2. Through three gray beads we thread the opposite edge of the wire in the opposite direction.

3. We collect 4 gray beads on either end of the wire, and thread the other end in the reverse order.

4. Weave the next row in the same way, initially collecting 5 gray beads.

5. Now it’s the turn of the wings. We string 26 orange beads onto each edge of the wire.

6. Pass the end of the wire through the orange bead that was collected first. We do the same on the opposite side.

9. When the wings are ready, we return to weaving the body. For the next row, we collect 5 beads and weave using the parallel weaving technique.

• 7th row – 4 beads;
• 8th row – 3 beads;
• from the 9th row to the 21st - 2 beads.

11. To secure the product, thread one of the ends of the wire into the penultimate row of beads.

12. Then we twist the ends of the wire together and remove them with wire cutters.

The finished dragonfly can be attached to a hairpin or used as an original one.

We present to your attention a master class on making three-dimensional crafts from beads and wire on the theme of autumn.

We will need:

• beads of yellow, orange, gold or any other “autumn” shades;
• wire for weaving;
• 30 cm aluminum wire for the tree frame;
• white floss threads;
• decorative pot;
• white gouache;

• black gouache;
• hard brush;
• gypsum;
• water;
• decor (artificial moss, small pebbles);
• colorless aerosol varnish (you can use car varnish).

For the beaded tree we will use the loop weaving technique.

Follow this algorithm:

1. We measure 35 cm of wire, string 6 beads in the middle and fix it with several turns. This is our first leaf. Using the same principle, we make a second one, at a distance of 5 mm from the first, and then a third one.
   
   
2. On a piece of wire make 9 leaves and twist the workpiece, starting from the first leaf.
   
   
3. For one branch we use 3-6 blanks. We connect the blanks together, as shown in the photo, and wrap them tightly with thread.
   
   
4. Be sure to make a loop at the base for stability. We weave the branches, trying to do it evenly. Then, with several knots, we attach the thread to the top of the miniature tree and wrap it very tightly around the trunk from top to bottom.
   
   
5. The consistency should be close to thick sour cream. The bottom and walls of the pot should be lined with crumpled paper so as not to damage the container while the plaster is drying. Place the tree in a pot, fill it with solution and leave for half an hour. To give the birch tree some relief, before covering the trunk and branches with plaster, wrap them in a layer of gauze. We coat the trunk with the same mixture of water and plaster and leave it until completely dry.
   
   
6. Then, using a dry, hard brush and black paint, we make dark inclusions on the birch in random order, and paint the bottom of the trunk more thoroughly. Add small details: artificial moss, pebbles, etc.; straighten the twigs and leaves. Finally, coat the craft with a clear spray varnish.
   
   

Autumn birch tree made of beads and wire is completed. You can place it on a table in the living room or any other prominent place in the house so that guests can admire the creation of your hands.

First of all, we associate winter with snow. Making snowflakes from beads is easy and simple. Experienced craftswomen, looking at such a snowflake, will easily determine what needs to be done and in what order. If you are new to this activity, use the step-by-step instructions and do everything as shown in the photo.

We will need:

• transparent blue beads;
• diamond-shaped blue beads;
• wire for weaving with beads;

• small wire cutters or pliers
• thin lace.

1. We prepare all the necessary materials and tools.
2. We start working on the snowflake from the middle. We collect 6 beads onto the wire. We thread the opposite end of the wire into the outer bead in the reverse order. We should have a circle.
3. On the right edge of the wire we collect 1 bead, 5 beads and again 1 bead. We thread the opposite edge of the wire into the last bead in the reverse order.
   
   
4. We string 5 beads and one diamond bead onto the right end of the wire, which we pierce with the other edge of the wire using the parallel weaving technique.
5. Next, we weave a snowflake as described in the previous paragraph until we reach the starting point. We should get the following: an initial circular blank and 6 diamond-shaped beads framed by well-aimed beads.
6. We continue work where we left off. Now we weave 3 crosses according to the pattern that is often taken as a basis when weaving “beaded bracelets.”
   
   
7. Next, we thread the wire into the side beads of the previous cross, as shown in the photo.
8. We collect 3 beads and again thread the edge of the wire into the side bead.
   
   
9. We secure the wire with several turns around the bead and remove the ends with wire cutters.
10. We thread the wire into the central bead of one of the segments of the last row of the future snowflake and weave another side fragment. There should be 6 of these in total.
    
    
11. This is the simple New Year's craft made from beads that we have, the last step is to attach a cord, do this, guided by the photo.
    
    

You can make several of these ice snowflakes in different color combinations and decorate the Christmas tree with them. You can also show a little imagination and come up with your own versions of snowflakes.

Lemon wedge

We will need:

• large yellow beads for veins;
• strong thin thread;

• beads of light yellow and bright yellow colors;
• scissors.

Step-by-step weaving instructions:

1. We weave the first two rows using the “mosaic” technique (Fig. 1 - a, b).
2. Further to the middle of the row with a brick stitch (Fig. 1 - c).
3. Then we string a large bead and pull the thread through the stitch in the previous row so that it lies at the angle we need.
4. Then we weave along an arc (Fig. 1 - d, e, f). In each arc-shaped row we attach the beads to the thread of the previous row, which is under this bead. We place light yellow beads among bright ones, forming veins. We weave in this way until the arc lies from edge to edge of the original row.
Video with bead weaving lessons

Below are videos with master classes on bead weaving that we have collected for you. Perhaps they will interest you, and you will want to make one of the crafts shown in the lessons, or maybe even all of them!

Beaded ladybug for beginners

This video shows a master class for beginners on how to make an easy craft from beads in the shape of a ladybug. Beads of two colors are used: red and black, as well as copper wire. A baby ladybug can decorate a flowerpot, a keychain, or serve as a pendant on any other homemade bracelet.

Heart shaped box

This video demonstrates the algorithm for weaving a voluminous heart box made of beads. You can store jewelry in it. You can also make the box in red and present it as a gift for Valentine's Day.

Beaded earrings

After watching this video tutorial, you will learn how to make earrings in the form of watermelon slices and ice cream cones from beads. The instructions are quite simple and accessible for children.

As you can see, you can make many wonderful crafts from beads. Share your successes in beading in the comments - we will be glad to see your feedback.

Beads are a unique and versatile material for crafts - embroidery, weaving, creating jewelry and interior compositions. If you have a desire to do handicrafts, but have not yet decided on the material, pay close attention to beads.

You can easily get children interested in beadwork by making small wicker toys and keychains with them. As a rule, children quickly manage to master the technique of weaving with beads and begin to understand simple patterns.

Bead crafts for beginners are best made simple and not complicated, which will allow you to master the technique and accurately finish the product without abandoning what you started halfway.

Simple bead crafts

Crafts made from beads can be flat or voluminous; of course, flat ones are easier to make. Children really enjoy weaving little flat animals.

Handicraft stores probably sell beadwork kits, but there is no point in spending money on them; you can buy several colors of beads and wire, and you can find a great variety of beadwork patterns on the Internet.

Beaded dragonfly

Let's look at crafts made from beads and wire for children in detail. To make it you will need:

• beads of two colors
• wire 50 cm long.
• 2 black beads

We start weaving a dragonfly from the head, string a black bead onto a wire, then 1 piece of gray bead, again a bead and again 3 piece of gray bead. We place the beads in the middle of the wire.

At the next stage, we thread one edge of the base - we thread the wires through the 3 outer beads of gray beads. Next, string 4 gray beads. and thread the other end of the warp through them.

We weave a new row in the same way, only from 5 pieces. gray beads.

Now it's the turn of the wings. At each end of the wire we collect orange beads, 26 pcs.

Afterwards, we thread each end of the base into the first orange bead of the same row, tighten it, and we get a wing.

We perform the same manipulations with the other end of the wire, we get two wings. Exactly, because in the attached photo there are instructions for crafts made from beads.

Then we weave one row of the body. But we collect 5 pieces on one end of the base. gray beads, thread the other end into the beads we collected.

It was the turn of the next pair of wings. Only these wings are smaller, we string 23 pieces each. orange beads, shape the wings and then weave the 6th row of the body using 5 beads of gray beads.

There is very little left until the end of the work; we complete the dragonfly’s body as follows:

Note!

• in the 7th row we string 4 pieces. gray beads;
• in the 8th row 3 pieces;
• From row 9 to row 21 we string 2 beads.

When finishing weaving, thread the wire through the last row of beads so that both ends of the base point in the same direction. Then you simply roll up the wire and cut off the excess.

Your first bead craft is ready. You can see photos of simple bead crafts below.

The simplest beaded bracelets

There are many ways and techniques for making bracelets. Including beads, bracelets are often woven; for beginners it will be a little difficult, so we bring to your attention a set bead bracelet.

You will need:

• memory wire;
• beads and possibly larger beads, different colors, at your discretion;
• round nose pliers (pliers with rounded tips, for creating wire loops).

Memory wire is a spiral-twisted base for bracelets and is sold in craft stores. Measure the number of warp turns at your discretion and cut.

Note!

You must make a loop at one of the ends of the wire so that the strung beads do not slip off.

Now you collect beads, alternating with beads, play with colors, shapes and textures at your discretion.

You need to finish the bracelet with another loop to securely fasten the product. You have now created a fashionable multi-row bracelet that is very easy to make.

Improve your skills

We told and showed you the simplest DIY bead crafts. Agree, to create an unusual keychain or children's toy, and even more so a bracelet, it did not take much skill.

Involve children in needlework, it develops perseverance, attentiveness and develops creative thinking.

Don’t stand still, develop, make more complex crafts and after some time, you will be able to create beautiful and high-quality products.

Note!

Photos of bead crafts

DIY Aphrodite pearl necklace

The most versatile accessory of all jewelry is a pearl necklace. It may be your only piece of jewelry that doesn't require a pair like a ring and earrings. But... you can also weave a pearl bracelet with such a necklace. I won’t tell you that with such a necklace you can modify an outfit and give it a zest, you yourself know this very well) I would like to invite you to weave a pearl necklace with your own hands, which is not such a difficult task) The main thing you will need for work is this pearls and fishing line. Are we watching a master class on creating an image for a beautiful person?

By the way, pay attention to the photo, the collar of the silk blouse is trimmed with the same pearls, but only small ones. I found the idea and photo master class on a Portuguese website, may the authors forgive me, there was no way to copy and save the pictures on a computer), it’s worth protecting. I had to take pictures of everything and use screenshots for publication. If you don't know how to take a screenshot, check out screencapture.ru. Here you will find a description of the simple and easy-to-use Screen Capture program. The program is free and has many useful and necessary functions. The program downloads quickly, this is a new version. The program is simply necessary for blogging, try it)