DIY rectangular box without glue. The easiest ways to make a paper gift box. DIY pyramid-shaped box using a pattern

You will need

• Cardboard, ruler, pencil, scissors/utility knife, glue, colored paper (wrapping paper), decorative bow.

Instructions

Take a large sheet of cardboard. It should be dense enough and not brittle so that it does not crack at the folds. Draw a rectangle in the center. This will be the bottom of your box. The sides of the box are adjacent to its right and left sides. They are equal to the depth of the container itself.

Adjacent to the top and bottom edges of the main rectangle are two more sides of the box - front and back. Their height is equal to the height of the sides described in the previous paragraph. On the sides of each of these pieces, add flaps to connect the box. If you intend to store light objects in it, flaps 2 cm wide will be enough, otherwise it is better to increase the width as much as possible. Trim the edges of the valves at a 45 degree angle.

Bend the cardboard along all the drawn lines. Lubricate the valves with PVA glue and bend them inward, connecting them to the sides of the box.
While this is the part, make the lid. Its length and width are 2-5 mm greater than the length and width of the bottom of the box, and the height of the sides can be any. Also add sides for fastening to the two sides of the lid.

Following this pattern, you can make a cardboard box of almost any shape. Repeat the basic geometric figure as many times as there are sides in the box, add a bottom and flaps, and make the lid a few millimeters larger than the bottom area of ​​the box.

Prepare all the tools and materials for creation. Place cardboard in front of you, coat it with glue and stick paper (wrapping paper) on it. Iron it well so that there are no creases and let the workpiece dry slightly.

Turn the cardboard wrong side up and use a ruler and pencil to draw the shape shown in the picture. The size of the figure may be different, but all figures must be equal to each other. The allowance for gluing the box must be at least one centimeter, only in this case the box will ultimately turn out strong.

Cut out the resulting shape, bend it along the dotted lines and start gluing (the side covered with colored paper should be on the outside). Glue part A to part A", glue part B to part B", glue part C to part C", glue part D to part D". When gluing, try to press the parts together as tightly as possible so that there are no gaps.

In order for the product to ultimately look more elegant, it needs to be decorated. To do this, take a decorative bow (a bow in a contrasting color with the box itself is ideal) and glue it to the outside of the box lid (in the picture, the box lid is part E). To create such a box, only thick cardboard is suitable.

To make a box, take a sheet of thick craft cardboard measuring 23*23 cm and another sheet of the same cardboard measuring 16*16. Some types of craft cardboard are quite expensive, but you can use cheaper cardboard without losing quality. The gift box will have a taller bottom and a smaller lid, so different sized pieces of cardboard will be needed. The size can vary, as long as the lid and bottom fit together. Make slits in a piece of cardboard that matches the bottom of the box. This sheet should have dimensions 23*23. As a result, using scissors, you should get a design similar to an equilateral cross. The cuts should be made in this order. First, cut the sheet along the edges to a depth of 7.5 cm towards the center, also 7.5 cm away from the corners. Make 4 cuts on two opposite sides of the sheet. As a result, you should get 4 squares with a side of 7.5 cm at the corners of the cardboard sheet and 2 rectangles located between them. Then draw lines with a pencil on both sides of the sheet, marking the location of the cuts at the top and bottom. After cutting along the lines, you should get a shape that resembles a cross or an addition sign. At a distance of 4 cm from the edge, cut the side edges diagonally towards the center. After this you will have triangles at the top and bottom. Now let's start working on the second, smaller sheet of cardboard. Cut it the same way as the first one, just keep in mind the smaller dimensions. The result is a figure that resembles a cross or an addition sign. This figurine will have triangular notches at the corners. Now fold the corners where the triangular cutouts are located. There will be 4 of them: 2 below and 2 above.

Bring the sides of the cardboard sheet together, folding them toward the center. Take each corner from the bottom and fold it up. In this case, the central part of the sheet, which remains flat, should form a regular square. Those. you will get 4 side faces that surround the bottom in boxes. It remains to connect the side faces so that the triangular protrusions are located on the inside.

Connect the side edges so that the triangular protrusions are located on the inside. Fold the edges of the box upward, again making sure that the cutouts are located on the inside of the walls. These cutouts will serve to connect the individual side edges of the box.

Now perform the same operations with the lid. Take a smaller sheet of cardboard and fold the edges of the sheet as described above. Then fold the edges of the sheet towards its center, forming the sides of the box. Lift up all four edges. Remember to ensure that the triangular cutouts are on the inside at all times. Glue the triangular cutouts to the inside of the box walls. This way, you will have two halves of the box in your hands, which can be combined with glue. Then wait for the glue to dry by pressing the edges of the sides of the box. Then place the lid of the box onto its base. The homemade cardboard box is ready.

The easiest way to hide or pack something is to use a box. It is an excellent storage for gifts, cosmetics, and large boxes will help you pack things when moving, or to hide unnecessary items in a closet.
You can buy a box of any size in the store, but why waste it when you can learn how to make a cardboard box with your own hands.

What is needed for the box

Today you can buy a box for any idea, but it’s not difficult to make, and you can save money on the purchase.

You've probably seen beautiful boxes with round, rectangular, and oval shapes. There are boxes in the shape of butterflies, hearts and candies. You can build any box listed above with your own hands and give it a certain meaning, style and appearance. You will spend on work only the time and available tools that you have at home.

The craft is made from any type of cardboard. Of course, if you need a durable box, choose a dense material, the kind used to pack household appliances. Well, multi-colored thin cardboard is also suitable for gifts. What will be useful besides cardboard:

1. Templates. With their help, you can understand by what principle this or that box is folded.
2. For work it is better to use hot.
3. Scissors and pencil for marks. Be sure to mark with a pencil before cutting. This is the only way the box will turn out to be of high quality and neat.

First, let's learn how to make a box using the simplest method. Using the box diagram we proposed, you can make a product of any size, depending on the dimensions you need. Before starting production, please review the drawing and draw a scaled view.

We decide on the strength of the future box. Depending on the purpose of use, choose the appropriate cardboard. If you plan to decorate the finished product, use white cardboard, it is easier to mark on it. Next, we work according to the instructions:

1. When the drawing is transferred to cardboard, cut out the blank along the marked contours. Fold the material along the drawn folds.
2. Glue all the edges, do this work sequentially. Glue the next edge when you are sure that the previous one is firmly bonded.
3. Please note that the diagram has small protrusions at the top. They are made for the aesthetic appearance of the box and ease of carrying. We bend them and glue them.
   The box is ready.

Cardboard box with lid

If you need to learn how to make a cardboard box with a finished lid, then we have selected a simple diagram for you. Depending on its purpose, select the required material, for example, for a gift box, you can even use plain paper.

If you need to make a box with a square shape at the bottom and rectangular on the sides, then use the proportions indicated in the diagram. Further work is simple: transfer the diagram to cardboard, press through the fold lines, cut and glue.

We offer a sketch that you can use if necessary. This option has some tricks.

In this box model, the edges have a beautiful, beveled appearance, and on the sides at the top there are special holes for fastening. The finished container according to this pattern is ideal for giving gifts.

To learn how to make a durable cardboard box with your own hands, use the third diagram with additional side slots.

Making such a box is more difficult than the one discussed above. It has special “wings” on the lid, which have a rounded aesthetic shape. They are placed in a box and the lid closes firmly.

This box can be made of any size, just change the proportions indicated in the diagram.

Making boxes with inserts and tops

If you are wondering how to make a box with cardboard inserts, then we have selected several such schemes for you.

The first type of box is chosen more often. She has additional "wings". During the assembly process, they are placed inside the box, and it becomes stronger.

The lid on such a box also has inserts on the side; in addition, it includes side overlaps and a lock on the front. The elements allow you to increase the strength of the finished product.

Another option for a box with inserts. In this case, the inserts are placed on the bottom of the container. You may have seen such boxes when purchasing shoes.

We have attached a diagram of the box, print it out and then follow the instructions:

1. Pay attention to the presence of curly lines in the diagram. You need to make cuts along these lines.
2. The entire part that is at the bottom of the drawing relates to the bottom assembly. It's better to start working with it.
3. Each of the four sides for the bottom must be assembled in the correct sequence. The glue is applied at the point that is located in the upper left edge of the diagram.
4. Bend the wings on the lid and lower them onto the main part of the box. Thanks to the protrusions and an additional flap on the product, which is placed inside, the box closes tightly.

Box with removable lid

The following box options are ideal for gifts, packaging cakes, and if you need to make a small present, just reduce the proportions indicated in the diagram and make the desired size.

How to work with a drawing:

• transfer the diagram onto cardboard;
• We carefully bend the sides that are wider than the others upward;
• glue for strength;
• for the lid we take the same scheme, but make the width no longer three millimeters;
• glue the inserts and dry them.

If you need to learn how to make a cardboard box with your own hands with an aesthetic appearance, then use the following option. This product turns out beautiful and strong.

The proportions of the box are easy to maintain, despite the chosen size, because the basis of the work is an ordinary square.

Making a box:

• from the “virtual” square we make sides, draw corners to the sides;
• fold the blank and glue the sides on both sides.

The work on manufacturing the main part is completed. But how to make a lid? After all, we did not include a drawing. It is not needed, because you can make a lid according to the diagram for the box; it is enough to make the drawing a few millimeters larger.

Like the box itself, the lid will have small sides. Here you need to glue the sides for strength.

The product is ready. You can make a box according to these instructions not only cubic, but also rectangular.

Gift boxes

All previous manufacturing methods were suitable for a wide variety of purposes, from packaging large items to miniature devices. Let's dwell on the question of how to make a cardboard box for gifts. There are plenty of options.

There is nothing complicated in manufacturing. All work consists of the following steps:

• take cardboard, scissors and glue;
• print the template and transfer it to the main material;
• cut out blanks;
• bend the places where the dotted line is indicated;
• carefully glue everything together and press tightly;
• leave the box until completely dry;
• decorate to your liking.

If a simple box doesn't suit you, you can go ahead and make a cardboard round box.

Round box

The product can be classified as practical and beautiful. There will always be a use for such a box. It stores:

• costume jewelry;
• materials for needlework;
• cosmetics;
• clippings;
• photos;
• fabrics.

This packaging will be an ideal gift solution.

Making a box is easy. While these packages cost a lot of money in specialty stores, you can design them yourself.

Take cardboard and a template. Transfer the diagram to the material and cut out the blanks. Connect them with glue and you're done.

The round box has its own peculiarity. By cutting it out according to the template, you can change the size, but all the details and elements must remain unchanged, otherwise making the box will not work.

Romantic gift box

For those who love original packaging, you can make an interesting heart-shaped box. Put delicious candies or a cute gift there, and the one to whom the gift will be addressed will certainly appreciate your efforts. The packaging itself is easy to make.

Even looking at the diagram, you can understand by what principle it is assembled:

• print out the diagram;
• transfer it to cardboard;
• iron the folds;
• glue the workpiece;
• put a gift inside.

Ready. It would seem that the instructions on how to make a heart box out of cardboard with your own hands are simple. But there are nuances.

The principle of folding a box is similar to making packaging with a round shape. But in this case, the proportionality of the bottom of the heart plays an important role. This box has two bottoms, inner and outer.

Therefore, during the manufacturing process, it is better to use the diagram we provide; hand sketches may lead to poor-quality results. As for the rest of the work, it is performed according to the principle of making a box with round walls.

What can you fill the box you made with:

• paper butterflies;
• confetti;
• sweets;
• souvenirs;
• blocks;
• flower petals.

It can fit everything that you want to present to your loved one.

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Learning new ways to wrap gifts is always helpful, especially around the holidays. A DIY cardboard box can be a great addition to any souvenir. This skill will also be useful in creating new places to store personal items, small items and decorations. You will find a simple method below.

DIY cardboard box

Making a cardboard box with your own hands is not at all difficult, you just need to try at least once to fold everything according to the instructions. To create, you will need any paper, but thick paper will be more durable and suitable for storing things. Stores now sell a large assortment of different types of paper, including incredible colors, so it won’t be difficult to choose something to suit your taste.

Make boxes for cake, for sweets, for flowers, for New Year, Birthday, and for any other holiday, and we will tell you how to make a square or rectangular cardboard box without a lid:

• Prepare the necessary materials: scissors or a stationery knife, pencil, ruler, stapler or tape, paper.
• Place the sheet on a flat surface and make a drawing, indicating where the side walls will be and where the end walls will be. Use a ruler to draw even cut lines.
• Make four equal cuts, one on each side, and following the diagram, fold the structure.
• Secure the result with a stapler or tape, you can glue it with PVA.
• You can supplement the box with partitions.

How to make a small cardboard box

A small box made of cardboard with your own hands is made according to exactly the same drawing. The size is determined by you - it can even be very small. The lid is made exactly according to the same scheme, only it should be slightly larger than the box itself. Glue is also perfect for gluing the walls, but you will have to hold the gluing area longer so that the box does not fall apart. Such a cardboard box made of corrugated cardboard will look beautiful.

Often we are used to seeing in films how happy people pull out from under the Christmas trees or receive some kind of gift as a gift, but the key here is that the gift is packaged in a beautiful box. This is done mostly to create intrigue, less often to preserve the integrity of the gift. Of course, it’s much easier and less time-consuming to pack a prepared gift into packaging from a store, but it’s much more interesting to make a box

So, your product will look the way you want, and besides, such boxes are unique in their kind, so you will make them yourself. Making such boxes is not at all difficult, and most likely you yourself will receive indescribable pleasure from the work done with your own hands.

Box in classic style (for small gifts)

First, you'll need to roughly estimate the size of your gift, taking into account several important factors such as height, gift thickness, and gluing allowances. We will take these dimensions as the basis when making our own New Year's boxes.

The sharp ends of the box need to be bent inward, towards the center of the bottom square. Using the remaining uncurved ends, we grab the bent ones and wrap them inward. This will be our cover.

We make the second box using the same principle, and due to the fact that this square is one centimeter smaller, the box will close perfectly. Moreover, if you are thinking about how best to make a beautiful box for a gift, then for the other half of the box, take thick paper, not cardboard.

Such a home-made box will fit a gift measuring 5 or 6 cm and up to 3 cm high, i.e. approximately the size that could fit in your palm. If the gift is very small, and you don’t want it to dangle in the box like a rattle filler, then you can put light tissue paper on the bottom, prudently crumpling it.

A simple napkin would be a more convenient alternative. As you have seen, making such a small gift box is not at all difficult.

Such a box with a gift inside should be tied with a ribbon or a beautiful ribbon.

And since making such packaging boxes is not difficult, we want to show a few more options.

Box-cone

The bottom of such a gift box will be a piece of foil, which you will use to seal your box. The cone can be beautifully disguised by making a Christmas tree out of it.

Try it - it's great inspiration!

Box in the form of a prism

• A square cut out of thick paper measuring 18x18cm;
• Scissors;
• Ruler;
• Pencil;
• Ribbon and hole punch.

So, we draw the square in half and diagonally. We bend the corners towards the center, and then from the center of the edge into the deflections of the central square you need to draw even arcs.

After this, use scissors to cut off unnecessary corners, and at the rounded ends we pierce small holes using a hole punch and stretch a thin ribbon into them.

Box with a hiding place

And now we want to suggest making a gift box that will come with a little surprise. The box is a fake - it will fall apart when you remove the lid. By the way, the lid is made according to the same principle as we described in the classic box.

You can decorate the inner surface to your liking, glue pictures of old postcards, beads, and then put the gift in the finished box and pack it.

Don't forget the tape!

Felt box

You can decorate the box according to your preference. This box would be good as a handmade New Year's gift box.

So that's it. These are just the basics, and more complex patterns are suitable for those who already have experience in creating simpler box models.

Good luck and inspiration!

Views: 1,679

Do you like making gifts with your own hands? Looking for new ideas for packaging them? Now you will learn how to make a cardboard box with your own hands. The diagrams given in the text can be printed and used unchanged. If you like to add something of your own, modify them as desired.

Which form to choose

Perhaps you never realized how easy and quick it is to make a cardboard box with your own hands. Schemes and blanks can be very different, and accordingly, the final configuration of products is very different. They often say that beautiful packaging is already half the gift. If you want to surprise with your souvenir, come up with an unusual box shape. At the same time, even packaging that is not additionally decorated, but simply made from colored sheets, will look impressive.

In the case when you do not want attention to be distracted by the packaging, but it is simply needed for safety and ease of transportation, a regular shape in the form of a cube or parallelepiped will be sufficient. However, it is worth considering that you are preparing for the holiday, so it is good to add beautiful decor to the usual configuration. Any of the options can be used, and making a box using a ready-made template will not be difficult, even if you have never done it.

What you need

You need to prepare the following so that you can get a beautiful cardboard box with your own hands:

• Schemes, or, as they are also called, developments.
• Cardboard (white, colored, decorative).
• Printer or if you build the template yourself.
• Scissors or knife.
• A knitting needle, non-writing pen, or similar tool to trace invisible grooves along future fold lines.
• Glue or heat gun.
• Decorative elements (satin ribbons, stickers, bows, flowers).

As you can see, the work of creating beautiful packaging will not cause much trouble. No complex devices are needed. If you don’t have a heat gun and a printer, you can completely do without them by using your own construction of the box layout using a pencil and ruler and gluing it with regular PVA or a quick fixing compound.

Manufacturing technology

Let's look at how a cardboard gift is made. The work flow will be like this:

1. Find a template that suits your configuration.
2. Print it on a printer either directly on a large cardboard format, if possible, or on paper sheets, which can then be glued together and the template transferred to a piece of cardboard. It is most convenient, of course, to work with boxes whose scans fit on A3 or even A4 format. This is usually the maximum capabilities of a standard home printer.
3. So, here is a packaging template obtained by any method. Cut it out of the sheet along the contour and make cuts in the right places where gluing will occur.
4. Take the knitting needle or the tool that you have prepared and draw it along all the lines where the folds will go. It is better to do this on the back side, not on the front side. In professional slang, this operation is called creasing, and in printing houses, of course, it is performed by a machine. Such grooves prevent the cardboard from creasing when folding, that is, bending. So don't neglect it, otherwise the box may turn out sloppy and deformed.
5. Make folds along the appropriate guides.
6. Glue a three-dimensional shape from a flat piece.
7. Decorate the packaging with ties in the form of satin ribbons, a bow or anything else.

DIY cardboard box: diagrams

Square packaging is the most commonly used. There are different options, both solid and consisting of two parts - a base and a lid. It's easier to make boxes from one piece. Such packaging can be closed with ties or with the help of a cardboard “tab” that goes into a slot in the opposite part of the box. Below is a simple cube-shaped packaging option.

As you can see, the base of the scan is a square. The top of the product looks like a “roof” when assembled. You can use a pretty ribbon to hold the four pieces of the top together.

DIY cardboard box: simple but unusual patterns

If you want to make packaging with an unusual shape, use one of the following models. The first photo shows the simplest option. It is very easy to make as you only need to make four folds. At the top, the box is assembled due to the slot and the fastening element included in it.

If your souvenir is triangular in shape, use the following packaging. Although the development looks quite complicated, assembly is easy and quick. The main thing is to carefully make the fold lines. The gluing elements are small, made in the form of triangles.

Using the following template, you can make a beautiful round cardboard box with your own hands. The scheme is also simple and clear. The most important thing is to draw the arcuate fold lines evenly. This determines how neatly the shape of the package will be formed.

How to decorate the box

You have figured out the technology for creating the base, but just white packaging is not suitable for a gift. It should complement and decorate your souvenir. You can turn an ordinary box into a masterpiece of artistic skill in the following ways:

• Choose beautiful cardboard or thick paper (designer or for children's creativity). Sheets can be metallized, mother-of-pearl with embossing, patterns and other decorative options.
• Cut out the second opening of the box from thin packaging or other paper used in arts and crafts, and glue it on top of the base. This option is suitable when you need to make a box from very thick cardboard, which cannot be found with a decorative surface.
• Apply drawings or patterns to the box using paints using a brush, stencils, stickers, or decoupage napkins.
• If you are proficient in computer graphics editors at a high level, you can come up with your own box design, adding any images to the selected outline before printing, including photorealistic ones, for example, even with the birthday boy himself. The one to whom you give such a gift will definitely be surprised. The only thing you should take into account is that if you are going to print on colored cardboard, all your pictures will acquire the appropriate shade, so you will either have to color correct the workpiece or not use colors that cannot be changed (portrait photos).

There are as many options for decorating a product as there are possible layouts. It's good to combine different ideas.

So, you have seen how easy it is to make a cardboard box with your own hands. The patterns above can be easily used to create beautiful souvenir packaging for any occasion. By scaling the templates, you can make identically shaped boxes of different sizes. Create, decorate, surprise your friends and relatives with your skills.